Permits
How to Get a Sign Permit in Winnipeg, MB

Most signs need a sign permit in Winnipeg, MB. Under the Winnipeg Zoning By-law 200/2006, a sign needs a development permit, and all signs other than face replacements also need a building permit. The City processes both as one combined application, and the 2026 development permit fee starts at $63.
Our principal, Irteza Ahmed, P.Eng., worked at the City of Toronto as a building plans examiner and reviewed sign permit applications.
Do you need a sign permit in Winnipeg?
Section 178(2) of the Winnipeg Zoning By-law 200/2006 says that no person can erect, alter, relocate or repair a sign without a development permit, unless the by-law exempts it. The City’s Signs page adds that all signs other than face replacements need a building permit. Downtown sites follow the Downtown Winnipeg Zoning By-law 100/2004 instead.
Common exemptions:
- Window signs (179(4)): exempt unless they cover more than 50% of a window surface.
- Identification sign (180(8)): one fascia sign of up to 4 sq. ft. with the civic address and building name, for each use other than a single- or two-family dwelling.
- Construction sign (180(3)): non-illuminated, up to 108 sq. ft. and 12 ft high.
- Signs not visible from off the premises (180(9)).
If you install a sign with no development permit, the City charges a non-compliance fee. For commercial work, the 2026 fee is the permit fee or $655, whichever is greater.
Key sign rules in commercial districts
- Free-standing signs (Table 5-15.1): 20 ft high in C2, CMU, MMU, EI, M2 and M3, and 30 ft high in C3 and C4. The area limit is 1.25 sq. ft. per foot of frontage, to a maximum of 323 sq. ft. In C1, the limits are 8 ft and 48 sq. ft.
- Signs on a building: 25% of the building wall. Only the first storey or 15 ft of the wall, whichever is lower, counts (185(3)).
- Projecting signs: 9 ft minimum from grade to the bottom edge (182(7)).
- Roof signs: not permitted, except on the sloping part of a mansard roof (182(4)).
- Digital signs (183.1): 6-second minimum hold, 0.25-second maximum transition and automatic dimming. Digital moving copy signs are not permitted in any district without a variance.
A sign code check finds these problems before you apply.
Sign permit requirements in Winnipeg: drawings and documents
The City’s Signs Development and/or Building Permit Application Form (December 2024) asks for one fully dimensioned copy of:
- A site plan with the property lines, buildings, legal description and the distance from the sign to the nearest property line.
- A sign detail with the dimensions, connection details and the colour, size and shape of the copy.
- Elevations with the height from grade to the bottom of the sign and all existing signs on the same elevation.
- Structural drawings sealed by an engineer, where required, with a Professional Designer’s Certificate.
- For a digital sign, a Letter of Authorization for Digital Signs.
A new or altered free-standing sign needs its own application. The City also publishes sample sign drawings. Our sign permit drawings service prepares plans to this list.
When you need an engineer
The City states that most signs need engineered drawings. Engineering is not typically required for signs of 3.0 m² (32 sq. ft.) or less, signs 1.22 m (4 ft) or less above grade, separate letters of 0.37 m² (4 sq. ft.) or less with their own attachment, and face replacements. The City can still ask for it.
For free-standing signs, the City’s structural requirements guide asks for pile, anchor bolt, base plate and weld details and a design to the 2024 Manitoba Building Code. Signs with anchor bolts, welds or direct embedment must bear an engineer’s seal. See our sign engineering service.
How to apply for a sign permit in Winnipeg
- Find the zoning district. Check if the site is downtown, on a heritage resource or along a waterway.
- Check the sign against Sections 178 to 187 of the Zoning By-law.
- Prepare the drawings and the application form.
- Submit through Permits Online, by email to signpermitapplications@winnipeg.ca, or with one paper copy at Unit 31-30 Fort Street.
- Apply for an electrical sign permit if the sign is illuminated.
- Track the status and pay the fees in Permits Online.
A billboard also needs a Conditional Use application.
If the sign does not comply
A sign that does not comply can need a variance. The City reviews it at the same time as the development permit, as its permit process page explains. The 2026 commercial variance fee is $710 for a minor A-Variance, $1,565 for a B-Variance that the director decides, and $2,600 for a C-Variance that the Board of Adjustment decides. Read more about sign variances and what a sign variance is.
Winnipeg sign permit fees (2026)
These fees come from the City’s 2026 Fees and Charges Schedule, effective January 1, 2026. The lower building permit fee applies when the plans have an engineer’s seal at application.
| Permit | 2026 fee |
|---|---|
| Development permit: free-standing, mansard, projecting or other structural sign | $99 |
| Development permit: digital sign | $202 |
| Development permit: all other sign types | $63 |
| Development permit: sign face replacement | $39 |
| Building permit: free-standing sign, over 2.44 m and under 7.6 m | $325 sealed, $520 not sealed |
| Building permit: mansard roof, projecting or other structural sign | $196 sealed, $325 not sealed |
| Building permit: any other sign type | $131 sealed, $260 not sealed |
| Electrical sign permit: first sign | $131 |
| Sign encroachment application (not billboards) | $197 |
Other approvals you may need
- Electrical sign permit: required for all illuminated signs. Use the Electrical Sign Permit Application Form. Each additional sign installed at the same time costs $76.50 if free-standing or $21.50 if not.
- Sign encroachment: required for all projecting signs. Use the Encroachment Sign Application. A yearly fee of $66 plus $15.70 per m² of encroachment applies.
- Downtown urban design review: required for new or changed signs downtown. See downtown urban design review. The 2026 fee for a sign is $235.
- Heritage permit: required for signs on heritage buildings. The 2026 fee for a sign is $235.
- Waterway permit: required for signs along waterways.
Sign permit timeline and inspections in Winnipeg
The City’s sign pages do not give a review time. The City reports average times on its development permit processing times page. Incomplete applications cause delays.
The commercial sign inspections page says that inspectors check the structure, the attachment, the electrical connections and the placement of projecting signs. Request progress inspections during the work and a final inspection at the end.
For other prairie cities, read our Calgary sign permit guide and our Edmonton sign permit guide. Brands with many locations can use our national franchise permit program.
Need help with your Winnipeg sign permit?
Rouge Hill Consulting prepares sign permit drawings, engineering and applications for businesses and sign companies across Canada. Send your address, sign artwork and site photos through our contact page. We reply within one business day. See our sign permit services for what we include.



