Permits

How to Get a Sign Permit in Edmonton, AB

How to Get a Sign Permit in Edmonton, AB

Most permanent signs on private property need a sign permit in Edmonton, AB. The sign permit is a development permit under Zoning Bylaw 20001, with the sign rules in Section 6.90 and the exemptions in Section 7.120. You apply online, and the 2026 fee is $195 for a fascia sign and $415 for a freestanding or projecting sign.

Our principal, Irteza Ahmed, P.Eng., worked at the City of Toronto as a building plans examiner and reviewed sign permit applications.

Do you need a sign permit in Edmonton?

The City’s Permanent Signs page requires a sign permit for all signs on private property, except the signs in Section 7.120 of the Zoning Bylaw. Get the permit before you install the sign. The City states that installing a sign with no valid development permit is an offence.

Common exemptions in subsection 8 of Section 7.120 (non-residential zones, on-premises advertising):

  • Small fascia sign (8.22): non-illuminated, 0.5 m² or less.
  • Small ground sign (8.19): no digital copy, 1.5 m high or less, 1.0 m² or less.
  • Temporary window sign (8.20): no digital copy, less than 30 days.
  • Opening banner (8.21): one per business, less than 30 days, 5.0 m² or less.

In all zones, you can change the copy on a sign with a valid development permit if the use, location, size, height, design and illumination do not change (8.15).

Key rules in commercial zones

Section 6.90 sets rules for each group of zones. In the CG, CB and BE zones (subsection 6):

  • Fascia signs: 20.0 m² each, and 50% of the facade for all fascia and parallel projecting signs. On a building taller than 2 storeys, no part of a sign can be above the second storey, with one limited exception.
  • Freestanding signs: 20.0 m² and 8.0 m high, or 10.0 m for an on-premises sign more than 60.0 m from a residential site.
  • Projecting signs: 2.0 m maximum projection, and up to 2 perpendicular signs for each ground floor business.
  • Digital signs: 400 nits maximum between sunset and sunrise (3.15).

A sign over a driveway or a pedestrian path needs 2.5 m clearance in most cases (3.4). Find your zone on maps.edmonton.ca. A sign code check finds these problems before you apply.

On MU, MUN and some CN sites, a new building or a facade alteration needs a Comprehensive Sign Design Plan (3.22). Each later sign permit must comply with it.

Sign permit requirements in Edmonton: drawings and documents

For a fascia sign, the City asks for:

  1. A site plan with the address, a north arrow and the sign location dimensioned to the property lines.
  2. Elevations or a photo of the full facade, with the sign height, the clearance and the total sign area on the facade.
  3. Detailed plans with the dimensions, the copy in colour, the illumination, the materials and the method of support.
  4. Engineering details.

Freestanding and digital signs need a plot plan by an Alberta Land Surveyor. Digital signs also need the manufacturer’s specifications and a landowner confirmation of the brightness rules. Our sign permit drawings service prepares plans to these lists.

When you need an engineer

Projecting signs, digital wall signs and most fascia signs need an engineer’s design for structural capacity and attachment, authenticated to the APEGA standard. Exempt fascia signs are individual letters of 0.37 m² (4 sq ft) or less, plywood signs of 3.0 m² or less, fabric banners and painted signs. See our sign engineering service.

How to apply for a sign permit in Edmonton

  1. Find the zone, overlays and Direct Control rules for the site.
  2. Check the sign against Section 6.90.
  3. Prepare the drawings and documents for the sign type.
  4. Apply online through the City’s SelfServe portal. The paper form lists the Edmonton Service Centre, 10111 104 Avenue NW, for drop-off.
  5. Pay the fees. Intake staff check that the application is complete.
  6. Answer the Development Planner’s questions. The City emails the permit when it approves the sign.

If the sign does not comply

Under Section 7.100, the Development Planner can grant a variance. Give written reasons. The sign must not unduly interfere with the neighbourhood or materially affect neighbouring properties. The Development Planner cannot vary a maximum Height regulation unless the bylaw states otherwise. After a variance, the City mails a notice to owners within 60.0 m (Section 7.160). Read more about sign variances.

You or an affected person can appeal a decision to the Subdivision and Development Appeal Board. The appeal fee is $100.

Edmonton sign permit fees (2026)

These fees come from the Planning and Development Fee Schedules, effective January 1, 2026.

Sign development permit Fee
Fascia sign $195
Freestanding sign, projecting sign or Comprehensive Sign Design Plan $415
Minor or major digital sign $960 per panel
Off-premises advertising (not digital) Add 50% of the base fee per sign
Variance request Add 25% of the base fee
Encroachment fee for an aerial, canopy or projecting sign $50, plus a $300 or $500 application fee

The electrical permit has its own fee. For a development built without a required permit, double the regular application fee may apply.

Other approvals you may need

  • Electrical permit: the City adds it to the sign application. An electrical contractor or a certified Sign Service/Installation Technician does the work. See commercial electrical permits.
  • Encroachment agreement: a sign over City property or a road right-of-way can need an encroachment agreement. The City states that this can take 8 weeks or more.
  • Heritage: on a historical resource, the Development Planner consults the City’s heritage planners (3.5). Old Strathcona has its own signage user’s guide.
  • Provincial highways: a digital sign on a provincially controlled highway needs an Alberta Transportation permit.

Sign permit timeline and inspections in Edmonton

The City’s processing times page counts calendar days from a complete application to a decision:

  • Permanent sign: 5-day target. July to September 2026: 5-day average.
  • Digital sign: 55-day target. July to September 2026: 32-day average.

These times do not include notice and appeal periods. If there is no decision within 40 days after the City confirms that the application is complete, you can treat it as refused and appeal (Section 7.100).

The electrical permit sets the inspections.

For other provinces, read our Calgary sign permit guide and our Toronto sign permit guide. Brands with many locations can use our national franchise permit program.

Need help with your Edmonton sign permit?

Rouge Hill Consulting prepares sign permit drawings, engineering and applications for businesses and sign companies across Canada. Send your address, sign artwork and site photos through our contact page. We reply within one business day. See our sign permit services for what we include.

Need help with your sign permit?

Tell us about your project and we'll reply within one business day with next steps and a quote.

See our sign permit services.